Tapered roller bearing main bear with radial primarily diameter, the axial union load. Bearing outer ring rolling bearing capacity depends on the way Angle, the greater the carrying capacity of the larger Angle. This type of bearings is bearing separation, according to the bearing of the roller column number into a single, double row and four row circular cone roller bearings. The single row circular cone roller bearing clearance to users in the installation to adjust; Double row and four row circular cone roller bearings clearance has set up a file in the products based on user requirements given, need not to adjust the user.

Tapered roller bearings taper inner ring and outer ring have groove, tapered roller are arranged in between. All of the surface of the cone of lines in the projection of bearing the same point axis together. This design make circular cone roller bearings is especially suitable for bear composite (radial and axial) the load. The bearing axial load ability is the contact Angle α of the decision; Larger Angle α, axial load capacity is higher. Angle size by calculating coefficient e to say; E value is, the bigger the contact Angle is, the bigger the axial load bearing of the greater the applicability.

    Tapered roller bearings are usually separated model, namely the belt roller and maintains a component of the inner circle circle of inner cone components can and cone outside (outer) apart installation.

   Tapered roller bearings widely used in automotive, rolling mill, mining, metallurgical, plastic machinery, etc.


High quality Tapered roller bearings

Bearing No.

(mm) Dimensions

(Kg)

Load Ratings (KN)

(rpm ) Limiting speed

d

D

T

B

C

Rmin

rmin

Weight

Cr

Cor

Grease

Oil

30302	15	42	14.25	13	11	1.0	1.0	0.095	2209	21.6	9000	13000
30303	17	47	15.25	14	12	1.0	1.0	0.13	28.3	27.2	8500	12000
30304	20	52	16.25	15	13	1.5	1.5	0.17	33.1	33.2	8000	11000
30305	25	62	18.25	17	15	1.5	1.5	0.26	46.9	48.1	6700	9000
30306	30	72	20.75	19	16	1.5	1.5	0.387	59.0	63.1	5600	7500
30307	35	80	22.75	21	18	2.0	1.5	0.527	75.3	82.6	5000	6700
30308	40	90	25.25	23	20	2.0	1.5	0.72	90.9	107.6	4500	6000
30309	45	100	27.25	25	22	2.0	1.5	1.01	108.9	129.8	4000	5300
30310	50	110	29.25	27	23	2.5	2.0	1.31	130.1	157.1	3600	4800
32004	20	42	15	15	12	0.6	0.6	0.097	25.1	28.2	9000	12000
32005	25	47	15	15	11.5	0.6	0.6	0.11	28.0	34.1	8000	11000
32006	30	55	17	17	13	1.0	1.0	0.17	35.7	46.8	6700	9000
32007	35	62	18	18	14	1.0	1.0	0.22	43.2	59.2	6000	8000
32008	40	68	19	19	14.5	1.0	1.0	0.287	51.9	71.1	5300	7000
32009	45	75	20	20	15.5	1.0	1.0	0.34	58.4	81.4	4800	6300
32010	50	80	20	20	15.5	1.0	1.0	0.37	61.1	89.0	4500	6000
32011	55	90	23	23	17.5	1.5	1.5	0.551	80.2	117.2	4000	5300
32012	60	95	23	23	17.5	1.5	1.5	0.584	81.7	122.2	3800	5000
32015	75	115	25	25	19	1.5	1.5	0.875	10.31	160.2	3000	4000